contact us
Home Store Links  
 
Click on any image for more details on product
 
Shipping: unless otherwise arranged via email, all products will be shipped via USPS Priority which is a flat rate of $7 USD for shipments within the U.S. and $15 USD for any international destinations. Some countries may impose additional import taxes that are the responsibility of the buyer.
 
NEW! AP2 MP3 player with motion sensor input and delay timer
 
Check out our new AP2 audio player! The AP2 audio player will play MP3 audio tracks from a microSD card each time an input trigger is detected from a sensor such as a PIR motion sensor. A delay timer allows you to select how much time to wait before another trigger will be accepted. Plays in random mode or up to 99 tracks in sequential mode. Perfect for kiosk applications or adding high quality sound to theatrical props.
 
NEW! PC1 Prop Controller
 
The easiest prop controller ever. The PC1 allows you to record up to 13 minutes of actions for 2 independant relays that can be used to control lights, pnuematic valves, motors or any other device that you want to switch on and off. Trigger inputs for both digital high and low signals are available and when a trigger is detected it will play back the sequence that you recorded. Each relay provides both Normally Open and Normally Closed connections are rated at 28VDC at 5A (10A peak) and 120VAC at 5A (10A peak)
 
DT4 DTMF relay controller
 
Looking for a way to synchronize lights, pnuematic valves, motors or other devices to an audio signal? The DT4 DTMF Relay Controller provides the ability to independantly control 4 relays with DTMF tones. Dip switches allow the board to respond to different groups of tones allowing to you expand your system up to 3 boards on the same audio signal for independant control of up to 12 relays. Each relay can be turned on or off independantly or all 4 relays can be turned on or off at once. Each relay provides both Normally Open and Normally Closed connections are rated at 28VDC at 5A (10A peak) and 120VAC at 5A (10A peak)
 
RB4 Relay Board - General Purpose Relay Controller
 
Do you need to control relays with a simple logic signal? How about controlling relays using your servo controller board such as the Lynxmotion SSC-32? The RB4 Relay Controller provides the ability to control 4 relays independantly using only a standard 5V logic signal giving you a simple means of controlling AC lights, motors or other devices from a simple controller. Three-pin connectors for each relay plug directly into a standard servo controller.
 
RT1 Relay controller with sensor input and delay timer
 
The RT1 Relay controller provides the means of turning on lights, motors or other devices when triggered by a PIR sensor or other trigger. This relay controller has an "On-Time" selectable from 5sec to 5min and a delay timer allows you to select how much time to wait before another trigger will be accepted (15 sec to 30 min).
 
Single Color LED Eyes
This unit connects to your RC servo controller and instead of turning the servo, it adjusts the brightness of the two LEDs. Great for creating glowing "eyes" in your prop.
 
PIR Sensor with 10' connector cable
This is the Parallax PIR sensor which can detect human movement up to 20 feet away. Comes with 10' of connector cable and 3-position connector on the sensor end. This sensor requires 5V to operate and ouputs a 3V signal when movement is detected. Mates perfectly with our MP3 player and the relay timer.
 
5VDC 1A Power Supply
 
This slimline power supply mates perfectly with our MP3 player.
 
12VDC 650mA Power Supply
 
This slimline power supply mates perfectly with the D4 DTMF Relay Controller, RT1 Relay Timer Board and the RB4 Relay Board.
 
 
  Home Store Links Contact Us